HOW THE ROMANS MADE MOSAICS
Ancient Roman artists created many superb mosaics, some of which have lasted over 2,000 years. And, even today, artists are still using great skill and patience to create wonderful mosaics like the one shown above. A great quality about mosaics is how long they can last since they are made from materials like stone, glass, and ceramics. However, creating a stunning mosaic that also can withstand the test of time takes much preparation, skill, time, and resources.
Over many centuries, the Romans became masters in the art of creating huge, colourful, and stunning mosaics that we still enjoy today. But how did the Romans do this? What kind of materials did they use, and how did they prepare the surfaces that held the mosaics securely for so many centuries?
On this page, I explore five techniques Romans used when making mosaics, with a look also at the crucial layers beneath Roman mosaics that supported and protected them over the ages. I have also created a page showing ten of the greatest Roman floor mosaics ever discovered, if this interests you please click this link.
|
|
1. CREATE THE MOSAIC DESIGN |
|
|

Artist is sketching out a mosaic design concept
The first step in creating a mosaic, like any artwork, is to draw a design showing how the mosaic will look when finished, as shown in the photo above of an artist coming up with a concept. Therefore, when designing a mosaic, Roman mosaicists had to ask themselves:
-
Will the mosaic be a series of geometric patterns, or will it also include images of people and animals, for example. Will the
mosaic tell a well-known story or event? And how will these elements be arranged so the theme is understood by the viewer, and
also attractive?
- Will the mosaic be multi-coloured (polychrome), or just black and white? If the mosaic is to be multi-coloured, what range of colours will be required?
- What kind of materials should be used to show the desired colours? Different shades of marble only? Or, additional materials such as granite, glass, ceramics, and enamels? For example, if really vivid and shiny colours are desired, then coloured glass, enamel, or even ceramics should be used to create many of the small mosaic pieces known as tesserae (tess-er-ee) - a Roman Latin term still used today.
After a design was settled on, it was then sketched on the surface where the mosaic was being assembled to serve as a crucial guide to the artist. It is the same process when painters make a sketch on their canvas first before starting to paint, especially when the desired image is very complex.

VIDEO: Mosaic of a lizard being made in 2009
Starting with a simple sketch, this artist then creates a vibrant mosaic
Video credit: Picksnoz CC-BY-NC-ND-02 - 2009
In the instructive video above, you can see a modern artist creating a mosaic of a lizard, starting with a sketch, upon which the mosaic pieces are then assembled in stages. This is a vibrant and fun mosaic. Notice how the artist used large ceramic tiles broken into various sizes and shapes to create the whole work.
Step-by-step, the artist drew an outline and then assembled the lizard first, afterwards filling in the background using shades of green and blue, with some pieces looking black, though they may be a very dark green. Cutting all those pieces into the desired shapes must have taken a lot of work. Thank you to the artist for a beautiful and instructive video.
Unlike traditional mosaics made of thousands of small, square-shaped pieces, every piece in the lizard mosaic is irregular - like a loose puzzle - with some small and others large. This modern artist's technique, in my opinion, is a fascinating twist on the classic Roman mosaic technique called "opus sectile," which I explain in detail later in this discussion.
|
|
2. PRODUCE THE MOSAIC TESSERAE |
|
|
The second process involved making thousands of mosaic tiles and cubes, known as tesserae, from marble, stone, ceramics, glass, or enamel. The tesserae were made on-site or in a stonemason's workshop. These pieces could be quite small in size and had to be deep enough so they could be firmly held by a fine mortar. The photo below of an ancient Roman floor mosaic shows thousands of small cube-shaped tesserae forming a yellow and gray pattern. A special thank you to Helen Miles, a helpful mosaics artist who provided the great photo below. She has an interesting mosaics YouTube channel, in addition to her very informative mosaics website where even custom mosaics can be commissioned.

|
Roman mosaic tesserae are often cube-shaped because they are set in a layer of mortar, as seen in the photo above. It appears
most of the mortar has vanished over time, leaving many of the tesserae cubes fully exposed
|
It was very clever of Helen to place a penny against the exposed tesserae and supporting layers to give a sense of scale and depth. And, speaking of tesserae, all those hundreds of small cubes seen in the photo above are indeed the essential part of any Roman mosaic. Furthermore, as you can probably imagine, making all those tesserae was quite a task for Roman artists, considering how the materials had to be sourced from quarries or manufactured from glass, ceramics, enamels, etc.
After the required materials were sourced, and the desired colours chosen, the next laborious step was to cut the material into the desired cube or tile size. Afterwards, it was probably a good idea to arrange all the produced tesserae so the artist could more easily and efficiently locate the pieces needed whilst assembling the actual mosaic. It is probably reasonable to assume that artists today follow the same procedures when creating mosaics.
While in Rome last winter, I saw mosaics made only from marble, some from marble and glass, and others made from a combination of many materials, including ceramics. Because large Roman floor mosaics required over a million pieces, I imagine many Roman labourers were needed to chisel or saw marble and other materials into small pieces. After enough tesserae had been made, a flat and solid surface, free from moisture, was required to begin the process of assembling the mosaic, which is the next process.

Stonemason making tesserae using hammer and chisel, Spain, 2016
Photo licensed from Alamy
In the photo above, a stonemason or artist in Spain is using a hammer and chisel to make tesserae for mosaics while holding the pinkish stone against a large rock. He has covered his legs with a blanket for protection, with another blanket under him for comfort.
If we could go back in time, I am sure the Romans made their mosaic pieces much the same way. However, it is also likely that to create uniformly rectangular tesserae cubes, they may have also used a saw to cut strips of stone that were then separated into cubes. Similarly, in modern times I am sure that electric cutting tools are sometimes employed to manufacture tesserae quickly and efficiently. Today, people can buy tesserae online, and they come in a multitude of colours and materials.
|
|
|
| 3. |
CREATE A FLAT, SOLID & WATERPROOF UNDERSTRUCTURE |
|
|
Just as artists who paint require a canvas to create an image, people who create mosaics need a flat, solid, and waterproof surface to build their creations securely. Ancient Roman artists had to ensure the many thousands of mosaic tesserae remained firmly in place and protected from the elements, thus requiring a good understructure composed of several layers of various materials, as shown in the diagram below. These layers were especially required for floor mosaics that were walked upon by many people daily, in addition to the risk of water from the ground or rain that could cause damage.

Showing all four layers below a Roman floor mosaic that support and protect it
The diagram above shows how much effort went into the creation of Roman floor mosaics, especially when they were constructed on bare ground, which made it essential to create a firm foundation and provide protection from water damage. Thank you to ResearchGate, ThoughtCo.com, and HelenMilesMosaics.org for information that assisted me in the creation of this diagram.
Of course, floor mosaics built upon a stone or concrete surface with no exposure to humidity require fewer layers, just like wall mosaics. Therefore, the number of layers and the materials used to create them varied according to where a mosaic was being constructed.
A modern example is how the process is relatively straightforward if you want to build a hardwood floor on top of a concrete or pre-existing wooden surface. However, if you wanted to create a hardwood floor surface in a home with bare ground floors, you would have to do a considerable amount of preparation work beforehand. You would have to dig down a few feet, flatten the ground, compact it, put down a layer of gravel, compact it, pour a layer of thick cement, ensure it is level, let it dry, etc.

Section of a Roman mosaic showing the mortar nucleus layer
Mosaic section from Fishbourne Roman Palace, Sussex, England
Photo licensed from Alamy
Whether or not a Roman mosaic was located on a floor, wall, or ceiling, it still required at least three essential layers - the tesserae themselves, the thin adhesive mortar, and a thicker supporting layer of mortar below (called the "nucleus"). The photo above of an ancient mosaic shows these three layers, indicating a mosaic from a wall, ceiling, or floor that already had a solid supportive understructure (such as concrete).
The procedure for preparing the ground surface for floor mosaics was described by Vitruvius (architect to Emperor Augustus), the author of the "De Architectura", ten Books of Roman architecture. The section that discusses Roman floor mosaics is in Book 7, Chapter 1, Section 3, (click to view English and Latin texts). Another good source of information on Roman mosaics is "The floor mosaic substructures in Late Antiquity in provinces of Dacia Mediterranea and Dacia Ripensis", by Gordana Jeremic, 2014.
|
|
|
|
4.
|
ASSEMBLE THE MOSAIC - The Five Roman Techniques |
|
|
The process of assembling all the tesserae was a long and challenging task requiring great skill and patience. The number of mosaic tesserae in a sizeable Roman floor mosaic can number over a million. Furthermore, the Romans used various methods or techniques when assembling all the mosaic pieces, which I list below. The first three techniques were more commonly used than the last two methods.
I - OPUS VERMICULATUM
|
All the tiny mosaic pieces are assembled tightly togetherCapitoline Doves Mosaic, Capitoline Museum, Rome
Photo by permission of Gabriel Margaca - 2021
Notice how tiny and tightly packed the tesserae are, and the gaps between each piece are extremely small. Remember also that tesserae are tiny cubes because a certain depth was required to adhere well in the adhesive mortar below. This was the most demanding and difficult mosaic technique Romans used when they wanted to create high quality and detailed mosaics. If you want to create a mosaic that looks almost like a detailed and colourful painting, this is the way to do it. Remarkably, the mosaic above is made from different shades of marble only, and it is considered one of the best Roman masterpieces.
Round Roman floor mosaic with a circular emblema in the centre - Paphos, Cyprus.The central opus vermiculatum emblema is surrounded by numerous circular guilloches patterns done in opus tessellatum mosaics
Licensed from Dreamstime
Opus Vermiculatum mosaics were usually reserved for creating stunning images of people and animals within scenes from Roman and Greek mythology. And, because this mosaic technique required so much time and work, such mosaics were nearly always the main central panel - called an emblema - that was bordered on all sides with less dense mosaics typically based on geometric patterns and/or motifs. The photo above is an excellent example of a circular emblema bordered by circular motifs known as "guilloches." It is probably quite reasonable to say emblemas were the "star attraction", or main feature of floor mosaics in Roman times.
II - OPUS TESSELLATUM
|
White tesserae are larger and less packed compared to face tesseraeClose-up of "Spring" from Triumph of Neptune mosaic Licensed from Alamy
In the close-up photo of a Roman lady's face above, notice how much larger and less densely arranged the white mosaic pieces are - this is the essence of opus vermiculatum. Additionally, whereas the face and neck are composesd of smaller and more tightly packed tesserae (opus vermiculatum), the surrounding white "background" mosaic is not of the same quality and density.
To save time and expense, when large areas of a building, such as floors, were decorated with mosaics, Roman artists would use the opus tessellatum approach to fill in all or part of the mosaic, as shown in the photo below of floor mosaics from the Baths of Caracalla.
Larger pieces assembled loosely with larger gapsSection of floor mosaics from the Baths of Caracalla
From my Feb 2024 visit
Observe how the yellow, red, and green tesserae in the photo above are large, often rough in shape, loosely arranged, and there are noticeable gaps - this is an almost extreme example of Opus Tessellatum.
Now compare this density and quality to that of the Capitoline Doves mosaic shown earlier - the difference is enormous in terms of size, density, and quality of colour and arrangement. The apparent poor quality of mosaics seen in the photo above is perfectly understandable because of the enormous floor size of the Baths of Caracalla, second largest in the Roman empire. To save time, resources, and expense, a lower level of opus tessellatum mosaic technique was used to cover much of the floor space.
Another consideration is that opus tessellatum was not always as crude as shown in the photo above - it was often more refined, more ordered, more dense, and used tesserae more regular in shape (all pieces are rectangular, for example). There is a degree of variation in each technique in terms of size, density, and arrangement. There are numerous examples of fine Roman mosaics created using the opus tessellatum technique; and though they are not as refined as mosaics made using opus vermiculatum, they are nevertheless often attractive, complex, and interesting.
III - OPUS SECTILE
|
Opus Sectile mosaic from the 4th Century ADFrom the Basilica of Junius Bassus, Rome
Licensed from Dreamstime
The dramatic mosaic above of a tiger killing a bull is made from hundreds of marble and stone pieces that fit together perfectly. For example, every tiger stripe was inlaid within the yellow-orange giallo antico marble that forms the creature's tail and body - a lot of work. This is the amazing fourth Roman mosaic technique known as Opus Sectile. Another great opus sectile mosaic was found in the same basilica (Junius Bassus), and it can be viewed by clicking here (nudity).
The opus sectile technique is quite different from the first three based on assembling small cubes of stone to form patterns and images. In opus sectile, varying shapes of stone, glass, or ceramics are assembled seamlessly to form images of people, animals, and, quite commonly: geometric patterns, as seen in the following photo.
Opus Sectile Pantheon floor made of marble and granite sectionsPavonazzetto (white with veins), Porphyry (red), Giallo Antico (yellow), and Gray Granite
Photo licensed from amazing Emma Ros at Dreamstime
A very famous example of an opus sectile mosaic - seen by 8 million people every year - is the vast floor (43 metres/142ft wide) inside the magnificent 1,900-year-old Pantheon in Rome.
If you have already visited, you will have surely noticed the stunning floor (shown above) that so vividly shows us the incredible craftmanship of ancient Roman artisans. The whole floor is composed of large slabs of marble and granite cut into square and circular shapes. Furthermore, these stone sections were then assembled to create a repeating series of geometric patterns representing balance, harmony, unity, and symmetry, as seen in my diagram of the whole floor from above (click to view).
There are many examples of opus sectile in our world and daily lives. For example, anyone who has seen stained-glass windows or Tiffany Glass has seen a form of opus sectile, the difference being that stained glass has lead separations holding each piece of glass, whereas, in true opus sectile mosaics, the gaps are very small or almost non-existent. Another potential example is whenever you see designs in floors or walls that have inlaid shapes forming images or patterns.
To sum up the first three techniques, you can see how each technique is different, and yet also similar. Those differences are summarized in the diagram below which compares them directly to each other.
Photo Comparison of Opus Tessellatum, Opus Vermiculatum, and Opus Sectile
|

All three photo examples are Roman in origin, and are at least 1,500 years old.
The left image is a high quality opus tessellatum mosaic that is more refined compared to the Baths of Caracalla example seen earlier. The tesserae are more uniform in size and patterns are very coherent and pleasant.
The middle image is an opus vermiculatum mosaic known as the Gypsy Girl, with her famous startled gaze looking at us across the centuries. Once again, we see tiny and tightly packed tesserae being used the same way artists use small brush strokes to create beautiful images.
These labour-intensive opus vermiculatum mosaics were assembled by the artist in another location first on a thick piece of cloth or wood that had been sketched with the mosaic design. An adhesive held the mosaic pieces until the work was done and ready to be carefully transported and then positioned in its permanent home.
The far right image of horses shows the fascinating opus sectile mosaic technique that used pre-cut shapes of marble, ceramic, or glass that were assembled together like puzzle pieces. Used to create many kinds of images and patterns, opus sectile mosaics were demanding because each shape had to be cut precisely to ensure a good fit with all the other pieces. Given the limitations of ancient technology, it must have taken much time and effort to cut out all those precise shapes from stone, marble, ceramics, etc.
I will now discuss two other techniques used by the Romans to create mosaics - Opus Musivum and Opus Alexandrinum. These two techniques were used less often than the first three techniques described above.
IV - OPUS MUSIVUM
|

Opus Musivum mosaic made from blue, red, green, and yellow glass & enamel tesserae
Neonian Baptistery, Ravenna, 5th Cent.
Photo courtesy: Allesandro Caria, CC-BY-SA-04
A fourth technique for creating mosaics was Opus Musivum, used only on walls and ceilings. Remarkably, this technique used just glass and enamel tesserae - no marble, ceramics, or granite. The density varies from high to medium.
In the photo above, you can see how vivid the colours are - such deep greens, reds, and blues - something very hard to find in natural marbles, for example. and sparkling the tesserae are. This technique was used on walls and ceilings so that the mosaics would really stand out and amaze the viewer with their vivid and sparkling patterns.
To create glass tesserae to use in mosaics, for example, a panel of glass was shattered to form the cubes. Using glass and enamel to create mosaics created a wonderful effect, filling the mosaic with bright splashes of colour and sparkle. For those who may not know, the Romans used glass extensively for both windows and drinking vessels, in addition to tiles, and stunning bowls.
V - OPUS ALEXANDRINUM
|

Opus Alexandrinum mosaic made of red and green porphyry granite shapes embedded in white marble
Work of the Roman Cosmatesque Masters of the 13th century
A fifth Roman mosaic technique was a variation of Opus Sectile whereby the pre-cut shapes were all made from red porphyry granite and a "green porphyry" also known as Serpentine stone found in Laconia, Greece. A famous example of a large floor surface made using the Opus Alexandrinum technique can still be seen in the Curia Julia Roman Senate house that still exists in the Roman Forum (Forum Romanum).
This mosaic technique is called Opus Alexandrinum, and it was named after the city of Alexandria, Egypt, where the technique originated. The city of Alexandria was a major port city (Mediterranean Sea), and Egypt had become a Roman province for over 650 years (30 BC to 641 AD) after the death of Queen Cleopatra in 31 BC.
Making mosaics from porphyry is very difficult because it is not soft like marble - it is a form of granite, and much prized by the Romans for its colour and hardness, especially the reddish-purplish kind from Egypt. A great quality of porphyry is its great durability - it lasts a very long time.
But it is very difficult to carve or saw porphyry. In fact, when Roman artists made statues of people from porphyry, they often used marble instead for the head and arms because it is so much easier to carve fine details in marble, especially when using ancient tools. Today, in the Curia Julia Roman senate house, you can see a porphyry statue of Emperor Trajan, for example, with no head and arms, as seen in this photo.
You can imagine the amount of work required to cut all the porphyry shapes in the mosaic above.
|
|
|
| 5. |
GROUT, CLEAN, AND POLISH THE FINISHED MOSAIC |
|
|
After all the whole mosaic was finally assembled, the next step was to fill in the spaces between each piece with a grout mixture made of mostly lime, some sand, and water. Afterwards, the top surface of the tesserae was cleaned and then polished using a mixture of sand, stones, and powders - a likely laborious process.
Polishing the mosaic surface formed a flat and smooth surface, especially important for bathhouse floor where people may have been walking on bare feet, for example. Additionally, it is believed that, to enhance the colours and sheen of the mosaic, beeswax was regularly applied to the mosaic surface.
This concludes my discussion regarding how the Romans created mosaics, which was certainly a very long and expensive process, but it was certainly worth it. For example, let us consider the vast floor spaces of the Baths of Caracalla covered with floor mosaics that had to withstand countless people walking on them for over three centures (216 to 535 AD) - some of these mosaics are still there after 1,800 years. The Romans certainly did try to build things that would last a long time - and they often succeeded.
|
I have created another Roman mosaics page that explores Ten Famous Roman Floor Mosaics. I look at some of the finest and largest mosaics the Romans created. And, using many photos, diagrams, and some original drawings, I explore each mosaic with an in-depth look at its origins, history, and close-up views of the details that make each ancient mosaic unique. |
This ends my discussion of how the Romans made mosaics. As always, if you have any comments, questions, or advice, please feel free to email me. I always enjoy reading the interesting emails people sent me. And the only emails you will ever receive from me are replies back to you. I respect your privacy and right to be be free from nuisance emails. Thank you for reading, and take care everyone :) !


